This won't work where we are because of the floor plan we have, but it would be cool to remodel to a modern design like this home. Something about real clean lined modern urban design on a forested piece of land is appealing to me. As apposed to the so common cabin style home. Our floor plan is more cut up, but if I were starting from scratch, this would be a cool design with the expansive wall of windows to take in the view.
Friday, November 14, 2008
Wednesday, November 12, 2008
New Foundation
The new foundation is finally in and hopefully this week the house will be set back down on the new foundation and get buttoned up for the winter. When spring comes we'll begin working on the cosmetic type remodeling. Snow started falling soon as the foundation was poured so hopefully we'll have enough time to get it all framed back up and closed in. Replacing the foundation is going to be much nicer in the long run, but not as much fun as remodeling cosmetic things because with items like flooring and cabinets you can see immediate improvement on the property. Still, i'm excited about the new foundation.
Monday, November 3, 2008
Barn Door Hardware
You have to look at the overall expense when making decisions in construction. Building several homes over the years has taught me that a decision seemingly less expensive now, may not the most cost effective in the end.
Commercial Siding
Wood Burning Stoves
I'm learning some things I didn't know much about fixing this old place up. I have been on the lookout for a cool modern style wood burning stove for our wyoming house. I have found several options but none of them are matching up to what was already there before. At first I thought I could just tear into the wall and move the fireplace flue up or down to accomodate the stove that I had purchased - oh how nieve I was. Apparently when a fireplce flue is built they start at the bottom and work their way up. As a result, it's pretty difficult to modify the existing flue since all of the weight of the chimney pipe is bearing on the bottom fittings. So I have had to look at other alternatives for our stove that aren't quite like my original plan.
Option 1: built a small platform (about 6" high) and install this stove:
The rounded design isn't my favorite, but I think we're going for a modern style interior so either one would fit with the decor. These Morso stoves are apparently really nice. My parents have one in their home and [after owning many over the years] say that it is better than any they have owned. The glass stays clean and the convection design puts out a real even heat and burns longer than other stoves. I was hoping to get one installed before winter, but I don't think it's going to happen. I'd have to have all of the tile behind the stove done and with the home being raised 6' in the air right now with no power, it will be difficult to get it done. Priority is just getting the home back on the foundation and closing it up for winter.
No foundation



Well, the old foundation is officially gone. Now the excavation work begins to dig deeper so that the new footings and foundation are below frost depth. The old one was just few inches under ground which just doesn't fly in this part of Wyoming where the winters are fairly harsh. I hope they can get it all buttoned back up before winter hits.
Tuesday, October 28, 2008
Door Knobs
I've been in the hardware business for some time now. Ever since I started I wanted to eventually design and have manufactured a square knob wth a rectangular rosette. Well, Emtek beat me to it. Oh well, saved me some headache I guess. So I'm thinking of these for the wyoming house. We'll see if it goes along with everything else we put in the house, but today I'm liking them.
Raising a Home
The home has been lifted off of the foundation. And they did it without cutting down any trees!! I was stoked. I thought for sure they would have to cut some down to get those 60' beams in there. It's hard to snake a 60' beam through lots of pines and aspens, but they were able to do it. The lifting process began on Monday and the home was lifted 24" off the foundation by wendsday afternoon. We did have to disconnect the power on one side, and disconnect the plumbing in the crawl space. When the new foundation is set, the home will sit about 6" higher than it is now which will improve the situation. When I bought the home the ground sloped toward the home. Even after grading the land back out, the dirt level was right up next to the bottom of the siding. 6" was about all we could raise it without incurring a lot more expense so I figured that would do. I'm hopeing to make it up to WY this weekend to check this out. It's just cool to see something like this happen. I wish I could see someone else have to pay for it, but I think it will be well worth it in the long run. I debated quite a bit about replacing the whole foundation or just the trouble spots shown in the last post. My decision to replace the whole thing turned out to be a wise one. When the home was lifted Phi, [the guy doing the 3work for me] said that all the cracks we thought were hairline turned into full blown problem cracks as soon as the pressure was taken off. The footings turned out to only be 5" thick as opposed to 12" like they should be in the area. And the foundation wall was only 6" with no rebar - the norm around here is 8" with rebar. So I'm not excited about the expense since the liviability of the home will be about the same, but knowing the foundation is solid and not going anywhere will go a long way for sellability in the future. Not to mention eliminate problems that I might have with interior finishes cracking or seperating because the foundation is settling. Now the work begins for Phil, removing the old sections of foundation and hauling them off. I'm glad I opted not to handle this improvement by myself. You have to have the right kind of equipment to do something like this. I'll stick to things I know and have the equipment for like finish work, tile and hardwood.Picture below is the power panel we had to disconnect. I had to run down to the local power company and ask them to disconnect it. I was surprised how willing to work with me they were. Having worked in construction in larger cities I guess I am just used to utility companies more concerned about following a "process" that they don't really care at all about any kind of personal service. Every one at the power company was very helpful I came in on a Friday and they had it disconnected the following Monday. Looks like originally the power was not put in conduit- which it should be, so thats an expense I wasn;t planning on. But the power box is just 50' or so from the home so it shouldn't be too bad.
Tuesday, October 21, 2008
The Problem Areas.
So i took a trip up to the house to survey the situation. The foundation issues seem to be worse than when I bought the place so I have decided to replace the whole foundation and just do the job right the first time. Here are some pictures of the foundation cracks that keep getting bigger.
There are several cracks like these in various places around the house and after another hard winter, the cracks are worse than before. This is why when you do a project you should do it right. Because someone down the road will have to redo your work if it's not done right.
Tuesday, September 30, 2008
lifting a home
so i need to lift the home to be able to replace a section of foundation. As it turned out it costs almost as much to lift the entire home as it does to just raise/level the half that needs the foundation repair. There is a good section that is actually in pretty decent shape, but I'm thinking why replace just half and possibly end up having to replace the other half later should the older section fail. So I think we have decided to lift the entire home and replace the entire foundation. Crazy? I've been called worse things. Crazy expensive? kinda. What i worry is that if I ever need to sell the place, the old foundation will be an issue and may make an otherwise easy sale not happen.
One of the problems we face with raising the home to do the repair is that there are a lot of trees on the property. The home lifting company thinks they may need to cut down some trees to be able to get their beams in place. I never considered that as an option and of course I really don't want to have to cut down any trees. I've got to meet the contractor up there to see what our options are.
One of the problems we face with raising the home to do the repair is that there are a lot of trees on the property. The home lifting company thinks they may need to cut down some trees to be able to get their beams in place. I never considered that as an option and of course I really don't want to have to cut down any trees. I've got to meet the contractor up there to see what our options are.
Subscribe to:
Posts (Atom)


